01→ Open Span Paper Lampshade
A lightweight paper shade held within an open frame.
DIMENSIONS L 600 x W 500 x H 170 mm.
MATERIAL Shellac-finished grid paper, hand sewn onto a powdercoated black steel frame. Subtle variations are inherent to the handmade process.
DELIVERY DATE Made-To-Order - 3 Weeks.
SHIPPING $65 AUD Australia-wide.
Each shade is carefully packed with rigid protective filling to maintain its shape in transit.
Packaged dimensions: 650 × 550 × 200 mm.
USE Designed to sit within a standard E27 lampholder using the integrated ring. Compatible with both hardwired ceiling pendants and plug-in cord sets.
For plug-in installations, a compatible cord set is available below.
Designed for use with low-heat LED bulbs. An E27 warm white globe (max 6W) is recommended.
$460 AUD
Note - This piece is supplied as a shade only. Compatible hardwired and plug-in options can be selected below.
SUGGESTED HARDWIRED OPTION
2m Hardwired Black Pendant Cord with Slim Ceiling Plate
A compatible E27 hardwired cord set selected for use with this shade. Installation by a licensed electrician is required. Note: The cord can be shortened during installation to achieve the required drop, but 2 m is the maximum length. For custom longer lengths, please email to order.
$120 AUD
SUGGESTED PLUG-IN OPTION
6m Plug-In Black Cord
A compatible E27 cord set selected for plug-in use with this shade. Typically, the cord is plugged into a wall outlet, then hooked to a ceiling cup hook directly above, before looping to a second hook at the point you’d like the pendant to hang. This set up may be limiting in spaces with higher ceilings.
$40 AUD
SUGGESTED HARDWIRED OPTION
2m Hardwired Black Pendant Cord with Slim Ceiling Plate
A compatible E27 hardwired cord set selected for use with this shade. Installation by a licensed electrician is required. Note: The cord can be shortened during installation to achieve the required drop, but 2 m is the maximum length. For custom longer lengths, please email to order.
$120 AUD
SUGGESTED PLUG-IN OPTION
6m Plug-In Black Cord
A compatible E27 cord set selected for plug-in use with this shade. Typically, the cord is plugged into a wall outlet, then hooked to a ceiling cup hook directly above, before looping to a second hook at the point you’d like the pendant to hang. This set up may be limiting in spaces with higher ceilings.
$40 AUD